Try Robot Structural Analysis free for 30 days - Autodesk[^2^]
Autodesk Robot Structural Analysis Professional 2020.1 x64 Free Download
If you are looking for a powerful and reliable structural load analysis software that can help you create more resilient, constructible, and code-compliant designs, then you should consider Autodesk Robot Structural Analysis Professional 2020.1 x64. This software is a part of the Architecture, Engineering & Construction Collection, an essential set of integrated Building Information Modeling (BIM) tools that can enhance your productivity and collaboration in any project.
Autodesk Robot Structural Analysis Professional 2020.1 x64 Free Download
In this article, we will give you an overview of what Autodesk Robot Structural Analysis Professional 2020.1 x64 is, how to download and install it, how to use it, and some frequently asked questions about it. By the end of this article, you will have a better understanding of why this software is one of the best choices for structural engineers and designers who want to create high-quality and efficient structures.
What is Autodesk Robot Structural Analysis Professional 2020.1 x64?
A brief introduction to the software and its features
Autodesk Robot Structural Analysis Professional 2020.1 x64 is a structural load analysis software that verifies code compliance and uses BIM-integrated workflows to exchange data with Revit and other design tools. It can help you to create more resilient, constructible designs that are accurate, coordinated, and connected to BIM.
Some of the features of Autodesk Robot Structural Analysis Professional 2020.1 x64 are:
BIM-integrated workflows: You can exchange data with Revit and other design tools seamlessly, ensuring consistency and accuracy throughout the project lifecycle.
Wind load simulation: You can test wind loads during design to avoid costly changes later on. You can also use wind tunnel data from external sources or generate wind loads based on ASCE-7 or EN codes.
Extensive analysis capabilities: You can test the behavior of static, modal, and nonlinear structures using advanced finite element methods. You can also perform dynamic, seismic, buckling, fatigue, creep, thermal, and blast analyses.
Finite element auto-meshing: You can create a high-quality, advanced finite element mesh for more precise analysis results. You can also refine or modify the mesh manually or automatically.
Country-specific design standards: You can work with country-specific section shapes and building codes in imperial or metric systems to support code-checking. You can also use Eurocodes or American codes for steel, concrete, timber, or composite structures.
Open and flexible API: You can create custom parametric structures or optimize the software using the open and flexible API. You can also integrate with other applications or create your own plugins using .NET technology.
The benefits of using the software for structural engineers and designers
Autodesk Robot Structural Analysis Professional 2020.1 x64 is not just a software, but a solution that can help you to achieve better outcomes in your structural design projects. Some of the benefits of using the software are:
Improved productivity and efficiency: You can save time and resources by using BIM-integrated workflows that streamline data exchange and coordination with other design tools. You can also automate repetitive tasks and simplify complex calculations using the powerful analysis capabilities and the open and flexible API.
Enhanced quality and accuracy: You can reduce errors and rework by using advanced finite element methods and auto-meshing that ensure more precise analysis results. You can also verify code compliance and optimize design performance using country-specific design standards and wind load simulation.
Increased innovation and creativity: You can explore different design scenarios and alternatives by using parametric modeling and dynamic analysis. You can also create custom structures or plugins that suit your specific needs and preferences using the open and flexible API.
How to download and install Autodesk Robot Structural Analysis Professional 2020.1 x64?
The system requirements for the software
Before you download and install Autodesk Robot Structural Analysis Professional 2020.1 x64, you need to make sure that your system meets the minimum requirements for the software. Here are the system requirements for the software:
Operating SystemMemory (RAM)Hard Disk SpaceProcessor
Microsoft Windows 10 (64-bit)8 GB or more1 GB or moreIntel Core i5 or higher, or equivalent AMD processor
You also need to have a graphics card that supports DirectX 11 or later, a monitor with a resolution of 1280 x 1024 or higher, an internet connection for activation and updates, and a mouse or other pointing device.
The steps to download and install the software from the official website
To download and install Autodesk Robot Structural Analysis Professional 2020.1 x64 from the official website, you need to follow these steps:
Go to the official website of Autodesk Robot Structural Analysis Professional 2020.1 x64.
Click on the "Download Free Trial" button to start the download process.
Select your operating system, language, and version, and then click on "Next".
Sign in with your Autodesk account or create one if you don't have one.
Select your preferred download method, either browser download or install now.
If you choose browser download, save the file to your desired location. If you choose install now, follow the instructions on the screen to complete the installation.
Once the download is complete, run the setup file to start the installation process.
Follow the instructions on the screen to complete the installation process.
The activation process and the license options
To activate Autodesk Robot Structural Analysis Professional 2020.1 x64, you need to have a valid license for the software. There are two types of licenses available for the software: single-user license and multi-user license.
A single-user license allows you to use the software on one computer only. A multi-user license allows you to use the software on multiple computers within a network. You can choose either type of license depending on your needs and preferences.
To activate your license, you need to follow these steps:
Launch Autodesk Robot Structural Analysis Professional 2020.1 x64.
Select "Enter a Serial Number" from the "Let's Get Started" screen.
Enter your serial number and product key, which you can find in your Autodesk account or in your email confirmation.
Select "Next" to continue.
Select your license type, either single-user or multi-user, and then click on "Next".
If you choose single-user, sign in with your Autodesk account or create one if you don't have one. If you choose multi-user, enter your server name or IP address, which you can get from your network administrator.
Select "Activate" to complete the activation process.
How to use Autodesk Robot Structural Analysis Professional 2020.1 x64?
The user interface and the main tools of the software
Autodesk Robot Structural Analysis Professional 2020.1 x64 has a user-friendly and intuitive user interface that allows you to access the main tools and functions of the software easily. The user interface consists of the following elements:
The ribbon: The ribbon is located at the top of the screen and contains various tabs and commands that are grouped by functionality. You can use the ribbon to create, modify, analyze, and view your structural model.
The project browser: The project browser is located on the left side of the screen and shows the structure of your project in a hierarchical tree view. You can use the project browser to navigate, organize, and manage your project data.
The data panel: The data panel is located on the right side of the screen and displays the properties and parameters of the selected element or object in your model. You can use the data panel to edit and modify your model data.
The graphics window: The graphics window is located in the center of the screen and shows the graphical representation of your structural model. You can use the graphics window to create, select, move, rotate, scale, and manipulate your model elements.
The status bar: The status bar is located at the bottom of the screen and shows information about your current action, mode, or command. You can also use the status bar to access some tools and settings, such as snap, grid, units, zoom, pan, etc.
How to create and analyze a structural model using BIM-integrated workflows
One of the main advantages of Autodesk Robot Structural Analysis Professional 2020.1 x64 is that it supports BIM-integrated workflows that allow you to exchange data with Revit and other design tools seamlessly. This means that you can create and analyze a structural model using BIM-integrated workflows in the following steps:
Create a structural model in Revit or import an existing model from another design tool.
Link or export your model to Autodesk Robot Structural Analysis Professional 2020.1 x64 using the BIM 360 or BIM Link options.
Open your model in Autodesk Robot Structural Analysis Professional 2020.1 x64 and review or modify it as needed.
Define the load cases, load combinations, analysis parameters, and design codes for your model.
Run the analysis and check the results in terms of displacements, forces, stresses, reactions, etc.
Perform code-checking and design optimization for your model according to your selected design standards.
Update or synchronize your model with Revit or other design tools using the BIM 360 or BIM Link options.
How to test wind loads and perform code-checking for different countries
Another important feature of Autodesk Robot Structural Analysis Professional 2020.1 x64 is that it can help you to test wind loads and perform code-checking for different countries. This means that you can test wind loads and perform code-checking for different countries in the following steps:
Select a wind load case from the load cases list or create a new one.
Select a wind load type from the wind load types list or create a new one.
Specify the wind load parameters, such as wind speed, direction, exposure category, terrain type, etc., according to your selected wind load type.
Apply the wind load to your model elements using various methods, such as global or local coordinates, pressure coefficients, wind tunnel data, etc.
Run the analysis and check the results in terms of wind pressures, forces, moments, etc.
Select a design code from the design codes list or create a new one.
Specify the design code parameters, such as material properties, safety factors, limit states, etc., according to your selected design code.
Perform code-checking for your model elements using various methods, such as unity check ratios, capacity curves, interaction diagrams, etc.
Review or modify your design as needed based on the code-checking results.
How to customize and extend the software using the open and flexible API
The last feature of Autodesk Robot Structural Analysis Professional 2020.1 x64 that we will discuss in this article is that it allows you to customize and extend the software using the open and flexible API. The API stands for Application Programming Interface, which is a set of commands, functions, and protocols that enable communication and interaction between different software applications.
By using the API, you can create custom parametric structures, optimize the software performance, integrate with other applications, or create your own plugins that enhance the functionality of the software. You can use the API in various programming languages, such as C#, VB.NET, Python, or C++. You can also access the API documentation and examples from the software help menu or online.
Some of the things that you can do with the API are:
Create custom parametric structures: You can use the API to create custom parametric structures that are defined by geometric or mathematical rules. You can also modify or update these structures dynamically based on user input or analysis results.
Optimize the software performance: You can use the API to optimize the software performance by controlling the analysis parameters, such as mesh size, solver type, convergence criteria, etc. You can also automate or batch process multiple analysis tasks using the API.
Integrate with other applications: You can use the API to integrate with other applications, such as Excel, MATLAB, SAP2000, etc. You can also exchange data with these applications using various file formats, such as CSV, XML, JSON, etc.
Create your own plugins: You can use the API to create your own plugins that enhance the functionality of the software. You can also share your plugins with other users or download plugins from other developers online.
Conclusion
A summary of the main points and the advantages of the software
In this article, we have given you an overview of what Autodesk Robot Structural Analysis Professional 2020.1 x64 is, how to download and install it, how to use it, and some frequently asked questions about it. We have also discussed some of the features and benefits of the software, such as:
BIM-integrated workflows that streamline data exchange and coordination with other design tools.
Wind load simulation that tests wind loads during design to avoid costly changes later on.
Extensive analysis capabilities that test the behavior of static, modal, and nonlinear structures using advanced finite element methods.
Finite element auto-meshing that creates a high-quality, advanced finite element mesh for more precise analysis results.
Country-specific design standards that support code-checking and design optimization for different countries.
Open and flexible API that allows customization and extension of the software using various programming languages.
We hope that this article has helped you to understand why Autodesk Robot Structural Analysis Professional 2020.1 x64 is one of the best choices for structural engineers and designers who want to create high-quality and efficient structures. If you are interested in trying the software for free, you can download a 30-day trial version from the official website of Autodesk Robot Structural Analysis Professional 2020.1 x64. You can also contact us if you have any questions or feedback about the software or this article.
A call to action for the readers to try the software for free
If you want to experience the power and reliability of Autodesk Robot Structural Analysis Professional 2020.1 x64 for yourself, we have a great offer for you. You can download a 30-day trial version of the software for free from the official website of Autodesk Robot Structural Analysis Professional 2020.1 x64. This trial version will give you full access to all the features and functions of the software without any limitations or restrictions.
To download your free trial version of Autodesk Robot Structural Analysis Professional 2020.1 x64, simply follow these steps:
Go to the official website of Autodesk Robot Structural Analysis Professional 2020.1 x64.
Click on the "Download Free Trial" button to start the download process.
Select your operating system, language, and version, and then click on "Next".
Sign in with your Autodesk account or create one if you don't have one.
Select your preferred download method, either browser download or install now.
If you choose browser download, save the file to your desired location. If you choose install now, follow the instructions on the screen to complete the installation.
Once the download is complete, run the setup file to start the installation process.
Follow the instructions on the screen to complete the installation process.
Launch Autodesk Robot Structural Analysis Professional 2020.1 x64 and activate your trial license using your Autodesk account.
That's it! You are now ready to use Autodesk Robot Structural Analysis Professional 2020.1 x64 for free for 30 days. You can create and analyze any structural model you want using the software and enjoy all its features and benefits. You can also access the help menu or online resources for more guidance and support.
Don't miss this opportunity to try Autodesk Robot Structural Analysis Professional 2020.1 x64 for free and see how it can help you to create more resilient, constructible, and code-compliant designs. Download your free trial version today and start your journey with one of the best structural load analysis software in the market.
FAQs
What are some of the new features in Autodesk Robot Structural Analysis Professional 2020.1 x64?
Autodesk Robot Structural Analysis Professional 2020.1 x64 is the latest version of the software that was released in October 2019. Some of the new features in this version are:
A new wind load generator that allows you to generate wind loads based on ASCE-7 or EN codes.
A new steel connection design module that allows you to design and check steel connections according to AISC or Eurocode standards.
A new timber design module that allows you to design and check timber structures according to NDS or Eurocode standards.
A new composite design module that allows you to design and check composite structures according to ACI or Eurocode standards.
A new user interface that is more modern, intuitive, and customizable.
A new cloud service that allows you to store and share your projects online using BIM 360.
What are some of the supported file formats and design codes in Autodesk Robot Structural Analysis Professional 2020.1 x64?
Autodesk Robot Structural Analysis Professional 2020.1 x64 supports various file formats and design codes that can help you to work with different types of structures and standards. Some of the supported file formats and design codes are:
File FormatsDesign Codes
RVT, DWG, DXF, IFC, CIS/2, SDNF, STP, XML, CSV, etc.AISC, ACI, NDS, ASCE-7, EN, ISO, DIN, BS, etc.
How can I get support and learning resources for Autodesk Robot Structural Analysis Professional 2020.1 x64?
If you need any support or learning resources for Autodesk Robot Structural Analysis Professional 2020.1 x64, you can access them from various sources, such as:
The help menu in the software that provides access to the user guide, tutorials, videos, forums, etc.
The online help center that provides access to the knowledge base, documentation, downloads, updates, etc.
The online learning center that provides access to the courses, webinars, certifications, etc.
The online community that provides access to the blogs, forums, groups, events, etc.
How much does Autodesk Robot Structura